Business support

Configuring your Cisco SPA122 ATA

Follow the instructions below to configure the profile rule for your Cisco SPA122 ATA (analog termination adapter), it has two analog FXS ports.

Important: The Cisco SPA122 ATA has been discontinued. Use this article for configuring your existing equipment.

To configure your Cisco SPA122 ATA:

  1. Connect your laptop or PC to the ATA (yellow port) by Ethernet cable.
  1. In a web browser, put in URL and type:
  1. User Name: admin
    Password: admin
Note: If the user name and password listed above do not work, contact your previous service provider or the company you purchased the device(s) from to obtain the password.
  1. Voice > Provisioning > Profile Rule. Copy and paste the following URL:$MA_SPA122.xml
  1. Submit, and then reboot the device.

Cisco SPA122

View all topics for: