Configure the 2.4 GHz Radio Setup for your Technicolor C1100T modem

2.4 GHz radio setup allows you to select the wireless channel (1-11), power level (10-100%), 802.11 modes (802.11b/g/n), spatial streams, aggregation, and MIMO power save. 
CenturyLink |

1.  Connect a device, such as a computer or tablet, directly to your modem using the Ethernet cable (usually yellow).

2.  Open a web browser and type into the web address field.

3.  Log in to your modem's settings (GUI) using the Administrator Username and Password, then select "Apply." Unless you have changed the default settings, you can find the login information on the modem's sticker.

Learn more about password security best practices.

4.  Select "Wireless Setup."

  1. Select "Radio Setup."
  1. Select the desired "Channel". Selecting the best channel depends on your environment. Check the modem wireless status for the best available channel. 
  1.  Select the desired "Wireless Power Level." The best Wireless Power Level depends on your environment.
Lower power settings will create a circular coverage area, giving better coverage near the modem but reducing the maximum distance.
Higher power settings create an elliptical coverage area, transmitting farther but reducing coverage closer to the modem.
  1. Select the desired 802.11 mode. Select a mode that will work for all wireless devices on your network. If you have all 802.11n wireless devices you should choose "802.11n" since choosing "802.11b or 802.11g or 802.11n" could negatively impact your wireless speeds.
  1. Select "MPDU", "MSDU" or "Disabled" for the frame aggregation state. Recommendation: MSDU
  1. Select "Enable" or "Disable" for the MIMO power save state. Recommendation: Disabled
  1. Select "Apply" to save your changes.
Top Tools
Internet Speed Test
Service Troubleshooter
Where's My Technician?
Modem Compatibility
Manage My Services
Find Product Availability
CenturyLink Product Support
Search Support