ECCKT

Identifies a circuit ID or multiple circuit IDs.

NOTE 1: The provider assigning this circuit identifier determines the content of this field in accordance with COMMON LANGUAGE® standards maintained by Telcordia™ Technologies.

NOTE 2: When a component within the format is purposely omitted, the component should still be delimited and compressed to eliminate any spaces.

NOTE 3: All components within the ECCKT should be delimited by either virgules or periods.

NOTE 4: If all positions in a component within the ECCKT are not populated, the component should be compressed to eliminate any spaces.

NOTE 5: Ranges should be shown within the appropriate component of the ID by specifying the lowest value of the component, hyphen, highest value of the component, e.g., trunk numbers 3500 through 3512 would be shown as 3500-3512.

NOTE 6: When disconnecting all circuits in a given account, “ALL” should be entered in this field, the BAN field populated, and the ACT field should contain a “D”.

VALID ENTRIES

  1. COMMON LANGUAGE Special Service Circuit Codes (CLCI S/S Codes) as defined by ANSI in ATIS-0300097 Structure for the Identification of Telecommunications Connections for the North American Telecommunications Systems or by COMMON  LANGUAGE in BR-795-402-100. A brief summary of the format can be found in ATIS-0404000, Section 2.14.3 and 2.14.4.

EXAMPLES

  1. COMMON LANGUAGE Message Trunk Circuit Codes (CLCI MSG Codes) as defined by ANSI in ATIS-0300097 Structure for the Identificat2ion of Telecommunications Connections for the North American Telecommunications System or by COMMON LANGUAGE in BR-795-400-100. A brief summary of the format can be found in ATIS-0404000, Section 2.14.2.

EXAMPLE

  1. COMMON LANGUAGE Facility Codes – (CLFI Codes) as defined by ANSI ATIS-0300097 Structure for the Identification of  Telecommunications Connections for the North American Telecommunications System or by COMMON LANGUAGE BR-795-450-100. A brief summary of the format can be found in ATIS-0404000, Section 2.14.5.

NOTE 1: Either Location A or Z must be 11 characters.

EXAMPLE

USAGE

This field is conditional.

NOTE 1: Required when the ECCKT field on the ASR form is populated, otherwise optional.

DATA CHARACTERISTICS

53 alphanumeric characters