NCI - Network Channel Interface Code

Identifies the interface characteristics on the circuit at the ACTL/Primary Location.

NOTE 1: The format and structure of this field is defined by ANSI in document ATIS-0300223, Structure for the Identification of Network Channel (NC) and Network Channel Interface (NCI) Codes for Information Exchange. The Network Channel Code consists of the following elements:.

NOTE 1: Required when the ACT field on the ASR Form is “N”, “C” or “T”, otherwise optional.

NOTE 1: Value must be 04DS6.44* or 04QB6.33* when CFA is present and NC begins with "HC".

NOTE 1: This example indicates no protocol options with transmission levels specified.

NOTE 2: If the protocol option field is not coded and the TLP Transmission Level Points is coded, a double delimiter #1 and #2 will be placed after character position five (5). In this case, delimiter #1 will be in character position six (6), and delimiter #2 will be in character position seven (7). The TLP will be left justified into character positions eight (8) and nine (9) accordingly.

NOTE 1: This example indicates no protocol options and transmission levels to be at the default level.

NOTE 1: This example indicates protocol options specified and transmission levels to be at the default level.

NOTE 1: This example indicates protocol options and transmission levels specified.

NOTE 1: This example indicates protocol options and one transmission level specified.

NCI//<![CDATA[ TextPopupInit('HotSpot39076', 'POPUP39076'); //]]> Network Channel Interface Code

NCI Network Channel Interface Code