If you can't dial out, start by figuring out if the problem is isolated to specific numbers or certain types of calls.
Happens with specific numbers/certain calls
Call from a different phone
If you call from a different phone -- like your work, a cell or a neighbor's house -- and are still unable to get through, the problem is with the number itself. You may need to find an alternate way to reach the person.
Call at a different time
If you have you successfully called this number from your phone in the past, try it again later. If still don't get through, the number probably is no longer in service, and you need to find an alternate way to reach the person.
Dial the number differently
If the problem only happens when you call certain numbers, maybe you're not dialing enough numbers (or maybe too many) when you place the call.
For instance, if you only use 7 digits and the phone equipment is expecting 11, your call won't go through. The simplest solution is try one of the patterns you haven't dialed yet:
- 7-digit (XXX-XXXX) -- phone number
- 10-digit (XXX-XXX-XXXX) -- area code plus phone number
- 11-digit (1-XXX-XXX-XXXX) -- 1 , area code and phone number
If you're calling internationally, dial 011 + country code + city code (where applicable) + telephone number. If you're calling Canada, there's no need to dial 011, the country code or a city code. For our neighbors to the north, you only need to dial 1 + 10-digit telephone number.
Note: Sometimes if you dial wrong, you will hear a recorded message. If you get a message, do as instructed.
Change your phone settings
If you can successfully call most numbers but can't get numbers associated with automated-help lines to recognize your entries, your phone probably needs to be changed from PULSE to TONE.
Many phones have a physical P/T switch located on the side, bottom or back of the unit. If you don't see a physical switch, get the phone's setup menu and look for the P/T settings.
Modify the calling instructions
To activate/deactivate many calling features (e.g., caller ID, voice mail, call waiting), you need to enter a star (*) and a code. If you're using a rotary phone, that's a problem because there's no star key on most rotary phones. In that case, dial 11 instead of the star so *60 becomes 1160.
Happens with ALL numbers/calls
- If you're hearing only dead air and/or don't have a dial tone, you need to check if you have service to your house or there could be a problem with your the equipment inside your home.
- If you're getting an "all circuits busy" message or hearing a fast-busy tone, hang up and try again later. The message is telling you there aren't any free, outgoing lines. This could be due to service outage (e.g., weather, equipment damage). If continue to receive the message, contact us.