How to configure Universal Plug and Play (UPnP) on your modem
Universal Plug and Play (UPnP) allows devices on the modem network to discover each other and establish sharing and communications. Devices that commonly use UPnP are printers, media servers, IP cameras, smart TVs and gaming systems.
Note: Your modem settings may appear slightly different from the images below, but the steps will be the same.
1. Connect a device to your network over WiFi or using an Ethernet cable connected to your modem. This works best on a tablet or computer.
2. Open a web browser and type http://192.168.0.1 into the web address field.
3. Sign in to the modem settings (GUI) using your Admin Username and Admin Password, printed on the sticker.
You can find the Admin Username and Password printed on the sticker attached to the side, back or bottom of the modem.
CAUTION!Do not remove your modem sticker. It includes your default Admin Username and Admin Password, which cannot be retrieved if lost. Your modem could become unusable without them.
4. Select Advanced Setup in the main menu.
5. Select UPnP in the left sidebar.
6. Follow the steps to edit the UPnP settings.
Step 1: Enable/Disable UPnP.
Step 2: Enable/Disable the UPnP NAT-T state. You can also view the list below.
.png){kind=icon}
